-
decided on how i want my wheels. since im going to paint my swingarm and forks black. im going to paint the wheels black as well and put this wheel tape on them. but instead of the red R, im getting the red F.
Leave a comment:
-
no, i highly doubt it will hold a passenger cause the brackets are made of aluminum. now if i were to make a set out brackets out of steel it probably would be able to support a passenger.Leave a comment:
-
well found out the new motor already has a Vance and Hines ignition advancer on it, kinda wonder if anything else has been done to it. the head is marked 2-1 31
Leave a comment:
-
Your poor Kat is soon going to have an Identity Crisis Breakdown...
It will turn out great anyways.Leave a comment:
-
HEY!!!! You can't show nudity on this site!
Really, nothing gets me more excited than a disassembled bike. It looks like fun!Leave a comment:
-
Bracketry for the new tail section
Shovel chop, lines still need cleaned up
just a couple pics
Leave a comment:
-
thought about that but probably will just paint the rear caliper black since i already have the chrome caliper bracket and chrome brake arm.Leave a comment:
-
Say this and thought of you:
Dont know if its a direct bolt up, but Im sure Thom can make it work. That cray mo-fo can make anything fit together!
Leave a comment:
-
That is one reason the HD boys use dielectric heavily in the chrome switch covers. also some good silicone will help matters. You definitely don't want to put things together without protection
Leave a comment:
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Working...
Leave a comment: