So i have been reading about Seafoam and a techron fuel cleaner, i was wondering if i could use both or just one, maybe at the same time? Anybody know?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Use one or the other...some people swear by sea foam, others use techron, there is probably no advantage to using both at the same time, they are both fuel system cleaners and will yield you the same results .Florida, the only place where you need your windshield wipers and sunglasses. At the same time.
05/02 1216 Kabandit
18v Rigid Drill
Craftsman Rubber Mallet with duct tape mod
New Balance 765 running shoes from 10th Grade, with duct tape and super glue mod
-
I would not combine them. I've used both.... and don't really have a preference. The seafoam is cheaper.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
I had good luck with Gumout Fuel cleaner in my kat after storing it this year. When I pulledd the bike out of storage it was running a little rough. I added the Gumout (I bought the one that said it specifically removed water from fuel) and I have not had any problems since.
Comment
-
Both contain light alphalytics, such as keytone, to act as solvents. That's their similarity.
Now for the differences:
Techron has some additional detergents as well, designed to improve the cleaning action within the fuel system's smallest passages (think injector-sized nozzle passages, not carbs). In theory, these should do a better job of cleaning the fueling system of carbon debris and especially of lacquers, but will do absolutely nothing for lubricating moving parts.
SeaFoam contains about 50% oil by volume, which should do a better job of lubricating moving parts, and may contribute to a different "Feel" in the engine if blow-by was an issue previously, at least for as long as the SeaFoam lasts. But, by definition, that means it contains less detergents and light petroleum products that actually do the scouring of fuel residues and other debris.
As to whether it's desirable to have well lubricated or squeaky-clean carb internals is a matter of choice, and theoretically at least, could be a matter of debate. Either way, I've never heard of a single Kat rider going "dag-nabit, this fuel system cleaner didn't work!" for either product.
Cheers,
=-= The CyberPoet
Comment
-
I was first started on Seafoam while working for Beacon Marine Yamaha.
We used it as a fuel stabiliser when storing boats and outboards as well as a fuel system cleaner when taking machines out of storage etc. It's a great product when used properly and will help prevent build up and will clean partly clogged fuel systems from gum and varnish.
Dust dirt and rust are a different story though. dirt and sand in a fuel system can't be cleaned with cleaners.98 GSX750F
95 Honda VT600 vlx
08 Tsu SX200
HardlyDangerous Motosports
Comment
-
You can add Seafoam to the engine oil, but don't leave it in there. I've used it on a few bike engines. Pour half a can into the engine oil, run the bike for 10 mins and drain. You'll be surprised at the crud that will drain out. It does a good job of cleaning the engine internals.2005 GSXF750 Katana
1991 Kawasaki Concours ZG1000
1993 Kawasaki VN750 Vulcan
Comment
-
Originally posted by gaillarry View Post[SeaFoam in the engine oil] You'll be surprised at the crud that will drain out.
Cheers,
=-= The CyberPoet
Comment
-
I found K100 G Fuel injection cleanor works great. (boat product) The others I have had no luck with.The truth knocks on the door and you say, "Go away, I'm looking for the truth," and so it goes away. Puzzling.
From Zen and the Art of Motorcycle Maintenance.
Comment
Comment