Ok a few weeks ago i washed my bike...nothing i hadnt done before. I let it sit for a bit and the ni came out, started it and went back into house to get helmet and stuff. While i was inside the house i heard the engine rpm drop suddenly and it sounded funny. I figured maybe some water got in the pipe so i goosed throttle and nothing. I rode it around the block and still nothing. It sounds like a V-tiwn now
So i started pulling wires and noticed that with the OUTSIDE cylinders unplugged(1 at a time) the engine didnt sound like it changed much, but with the inside cyl unplugged the bike wouldnt even fire up. The spark plugs were good and i even replaced the outside one that made the most difference while unplugged. Still nothing. So i replaced the coil for outside cylinders ( $80 :O ) i just got it yesterday and put in today. The bike is stil lthe same.
Also i noticed that it does idle fine , but if i goose the throttle it chokes then revs up slower than normal.still sounding bubbly too, but if i rev it slow it wont die.
Can anyone help please.i need this thing running tomorrow.
![Very Happy](https://katriders.com/core/images/smilies/icon_biggrin.gif)
So i started pulling wires and noticed that with the OUTSIDE cylinders unplugged(1 at a time) the engine didnt sound like it changed much, but with the inside cyl unplugged the bike wouldnt even fire up. The spark plugs were good and i even replaced the outside one that made the most difference while unplugged. Still nothing. So i replaced the coil for outside cylinders ( $80 :O ) i just got it yesterday and put in today. The bike is stil lthe same.
Also i noticed that it does idle fine , but if i goose the throttle it chokes then revs up slower than normal.still sounding bubbly too, but if i rev it slow it wont die.
Can anyone help please.i need this thing running tomorrow.
Comment