Just picked up a 95 Kat 600
Rebuilt carbs and bench synched them after riding the bike home 2 hours from the seller and during that time idle was inconsistent sometime 3k sometimes lower.
After the rebuild carb boot #2 on the airbox won't seat fully and may be causing a vacuum leak. it will idle at 2.5k once i try to go lower it drops right to like 500 rpm and soon after dies.
Seems to run better when first started and issues worsen once warmed up
You guys think it's simply the air box?
I tried spraying carb cleaner at the airbox boots and rpm seemed to increase slightly but hard to tell since the idle is so inconsistent
Rebuilt carbs and bench synched them after riding the bike home 2 hours from the seller and during that time idle was inconsistent sometime 3k sometimes lower.
After the rebuild carb boot #2 on the airbox won't seat fully and may be causing a vacuum leak. it will idle at 2.5k once i try to go lower it drops right to like 500 rpm and soon after dies.
Seems to run better when first started and issues worsen once warmed up
You guys think it's simply the air box?
I tried spraying carb cleaner at the airbox boots and rpm seemed to increase slightly but hard to tell since the idle is so inconsistent
Comment