I'm wondering what the difference is betwwen the pre 98 and 98+ cylinder head is. I know the 98+ cylinder head is silver, but the 98+ cylinder head uses a different gasket then the pre 98. I checked the dowel pins they are the same from pre to post, I checked the O rings there the same between the pre and post. The only thing I can figure is that the shape is different, but how different, will it look weird to put a 98+ cylinder head on a pre 98 cylinder?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
They should swap. I've got both out the garage. Hang on.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
-
You tell me if there's a difference... I don't see one.
They are stamped with the exact same patent number too.
-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Originally posted by arsenic View Postokay, I have a full gasket set for the pre 98 engine, the only gasket that is different is the cylinder head gaskket, I should be fine using a pre gasket right?
Thanks for any input
Comment
-
-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Thanks guys for the swift replys
Should say its a per 98 lump and +98 head is there any other bits i'd need to change or is this a straight swap like can i use my cams or will i need the + cams this is my first head swap so sorry if any questions are silly or newbie
thanks for the input
Comment
Comment