Heh, some pretty sweet advice, that's for sure!!!
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Originally posted by scottynoface View PostMake sure you get some printer paper to minimalize overspray1992- project katfighter
2005- GSXR750
2001- TL1000R
http://katriders.com/vb/showthread.php?t=111130
www.lunchtimecigar.com
KATRIDERS RALLY 2014 - cintidude04
KATRIDERS RALLY 2015 - cintidude04
KATRIDERS RALLY 2016 - cintidude04
Comment
-
Originally posted by scottynoface View PostPC is $300, I've just never heard of a bike with a stock ECU that is programmable for new fuel maps. Not saying there isnt, just that Im not aware of it. I dont pay much attention to Suzukis though
As for a Kawi, its not even close, the PC and Ign module are cheaper than the Kit ECU.
That said, I would much rather have the Kit ECU than the piggyback BS
It's the only system like it that I've ever seen.
Most people who get power commanders usually end up taking them off eventually....-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Thanks for the confusion Steve, I'm going to have to do research now. Well, maybe later, I think I'm just going to get the paper filter for this season. Seems a bit cheaper than a PC.sigpic
"* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"
2004 Katana 600 - Bought 01/06/2017
1993 Katana 600 - Traded for a truck.
2004 Katana 600 - Gone
2002 GSX-R600. - Gone
Comment
-
Originally posted by scottynoface View PostI've never heard of a bike from the big 4 having a tunable ECU stock. I know on the Kawis you have to replace with race ECU ($700) then buy the USB cable ($300) to have a timing and fuel adjustable, factory, non piggyback control unit.
Not saying I dont believe you, just that I've NEVER heard of that...John,
'05 GSXR750, '86 FZX700 Fazer, wifes bike '02 R6
sigpic
Comment
-
Originally posted by Psycho1 View PostSin actually has the programmer to do the stock GSX-R ECU's, like I said I know at least some are programmable, just not sure about the 02 600.
Pa, you dont need a PC for just a filter and slip on. It'll crackle a little bit, but it's not a big deal.90% of motorcycle forum members do not have a service manual for their bike.
Originally posted by BadfaerieI love how the most ignorant people I have met are the ones that fling the word "ignorant" around like it's an insult, or poo. Maybe they think it means pooOriginally posted by soulless kaosbut personaly I dont see a point in a 1000 you can get the same power from a properly tuned 600 with less weight and better handeling.
Comment
-
Originally posted by GSXFJim View Postprinter paper?.. meh.. too expensive...
wax paper rolls from the dollar store FTW...Any and all statements by Loudnlow7484 are merely his own opinions, and not necessarily the opinion of Katriders.com. Anything suggested by him is to be followed at your own risk, and may result in serious injury or death. Responses from this member have previously been attributed to all of the following: depression, insomnia, nausea, suicidal tendencies, and panic. Please consult a mental health professional before reading any post by Loudnlow7484.
Comment
-
!!! MAJOR UPDATE !!! Just got a package in the mail, ran over to the man-cave and installed THESE!!!
I KNOW, right!?!?!? Well, if you look back at the first page of the build, you'll see there were some 1.5' bolts in there, I bought the right ones, they're installed.sigpic
"* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"
2004 Katana 600 - Bought 01/06/2017
1993 Katana 600 - Traded for a truck.
2004 Katana 600 - Gone
2002 GSX-R600. - Gone
Comment
-
Indeed. Got a few more I have to order, but not paying the shipping for a couple tiny bolts. I'll wait 'till I order my chain/sprockets, or tires or something.sigpic
"* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"
2004 Katana 600 - Bought 01/06/2017
1993 Katana 600 - Traded for a truck.
2004 Katana 600 - Gone
2002 GSX-R600. - Gone
Comment
-
You should check with the local stealership for the bolts. Last week I noticed I lost one of my seat bolts. Stealership had them on the shelf, and didn't even charge me for them.John,
'05 GSXR750, '86 FZX700 Fazer, wifes bike '02 R6
sigpic
Comment
-
My local stealership is about 30 miles away. I'll just order the bolts.sigpic
"* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"
2004 Katana 600 - Bought 01/06/2017
1993 Katana 600 - Traded for a truck.
2004 Katana 600 - Gone
2002 GSX-R600. - Gone
Comment
-
I found Stainless bolts like the originals that could be used on fairings and such at my local ACE hardware... may be worth a shot...
Comment
-
Originally posted by Nut-Nut View PostI found Stainless bolts like the originals that could be used on fairings and such at my local ACE hardware... may be worth a shot...
Originally posted by UncleBuck View PostThis is a labour of love...
keep it up bro...
Lookin Good!!sigpic
"* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"
2004 Katana 600 - Bought 01/06/2017
1993 Katana 600 - Traded for a truck.
2004 Katana 600 - Gone
2002 GSX-R600. - Gone
Comment
Comment