I would like to get some swing arm sliders for my bike. If none are out there that will work, possible fabricate some. I also want to know if someone can tell me where I can get that little rear fender that goes on after you have eliminated the stock rear fender and relocated your tag and signals. The little one the bolts just above the tire and is countours around it. And finally wanted to know if it is feasible to replace the stock grips with these chrome one I found on ebay, but dont look compatible with my bar end weights/sliders. I was thinking about having the end cap, cut off to allow the weights to still be srewed back on, but then I would need a spacer in the to taper the dropoff. Can anyone get the picture or/and offer any help. Thanks!
_________________
_________________
Comment