My enricher recently will pull out when I open it, but when I close it on the left bar, it doesn't close the actually enricher.. I have to push it down with a finger... Should I just lube it or is there anything else I should fix/replace?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
something is missing, one of the springs perhaps?-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
-
If oxidization builds up inside where the plungers are, it will cause 1 or more of them to stick.
A good carb cleaning is the fix if that's the issue.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
If it opens with the cable, but won't close on the cable... then I'm thinking spring or cable problems.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
With it fully closed, I can pull it open and it goes back to closed (so I am guessing the springs are fine)... It feels like it is sticking in the fully open position (when I fully open it, I have to press with some force to get it to close... When it is partially open, it will close without a problem)...
Does it sound like cable or something with the plunger specifically at fully open?
Comment
-
Originally posted by numus View PostWith it fully closed, I can pull it open and it goes back to closed (so I am guessing the springs are fine)... It feels like it is sticking in the fully open position (when I fully open it, I have to press with some force to get it to close... When it is partially open, it will close without a problem)...
Does it sound like cable or something with the plunger specifically at fully open?
Detatch the cable and test... if no issues with out the cable, you narrowed down the issue.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
When this happened to me, the cable had rusted through the sheath and was rubbing/getting stuck. Really what you need to do is go take a look at everything and see what's going on. My plungers were fune.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Originally posted by Kreylyn View PostDetatch the cable and test... if no issues with out the cable, you narrowed down the issue.
Krey
Probably shoulder order the replacement turn signals and do them all at the same time (also have a lose neutral LED)
Comment
-
Originally posted by numus View PostHave to take off the fairing (which is a PITA)... Why couldn't they have made the fairings easy to take off like the GSXR
Probably shoulder order the replacement turn signals and do them all at the same time (also have a lose neutral LED)
Do what needs to be done, put the tank back on, tighten the fairing back up.
KreyLast edited by Kreylyn; 05-30-2013, 09:35 AM.93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by steves View PostWhen this happened to me, the cable had rusted through the sheath and was rubbing/getting stuck. Really what you need to do is go take a look at everything and see what's going on. My plungers were fune.
Originally posted by Kreylyn View PostI .... take the seat off, loosen the rear left fairing at the seat, use a small piece of wood placed between fairing/frame to hold it away from the bike, take the tank off with no issue...
Do what needs to be done, put the tank back on, tighten the fairing back up.
Krey
Edit: you mean the side fairings not the rear, right Krey?
Last edited by yngveny; 05-30-2013, 01:53 AM.2002 GSXF 750
Comment
-
Originally posted by yngveny View PostEdit: you mean the side fairings not the rear, right Krey?
Yeah, sorry that wasn't as clear...
rear left of the Main side fairing....
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Comment