ive been looking around the forums and using the search function and couldnt really figure out what was wrong, but the problem am having now is whenever i start up my bike i have to put the choke to about half so the bike warms up and what not, and after a few mins of it work i pull the choke lever up to normal ( where it shuts off ) and the thing thats messing up is that my bike still thinks that the choke is halfway down so the rpms stay up reving, and once i start messing with the choke cables it slowly starts droping to normal rpm. soo my guess is that i need to change the choke cables. am i correct on this or am i wrong. thanks
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
does the choke feel like its hard to move, i ended up replacing my cable for the same reasonnever argue with an idiot, they'll drag you down to there level and beat you with experience.
Originally posted by GSXFJimJust remember.. Stupid hurts...
-
it should move pretty freely if i was u i would pull the cable and se if it moves freely if not spend 16 bucks and get a new onenever argue with an idiot, they'll drag you down to there level and beat you with experience.
Originally posted by GSXFJimJust remember.. Stupid hurts...
Comment
-
i pull the choke lever up to normal ( where it shuts off )
Originally posted by Akathepriest View PostIf you look at the carbs and see that the choke is returing fully on all four carbs you need to clean and adjust your carbs.
Comment
-
Originally posted by ludiboris View Postyea i looked into it today, and am pretty sure my choke cable and my choke lever are acting up, i found a choke cable on a website but cant find a lever anywhere, does any1 know any sites that sell this in a set?
Comment
-
i would start with the cable they tend to get rusted and jam if not oiled on older machinesnever argue with an idiot, they'll drag you down to there level and beat you with experience.
Originally posted by GSXFJimJust remember.. Stupid hurts...
Comment
-
okay i havnt been on here in a while, busy with work and such, havent had time ride the bike either, so i didnt get to lube the cable yet, thought it would be fixed by it self if i let it stand for a while. but nope same problem turn the choke start my car, rpm roses to 4-5k and than i pull the choke lever shut off wich would make the bike turn off but the rpm's are still up at 4-5k, so i have to touch the cable and twist and turn it to get the rpms to drop to regular. soo would lubing the cable up fix this, or should i buy a new set of cables? thanks
Comment
-
buy a new cable and be done it cost me $16 3 weeks ago, btw spraying your cables with white lithium grease before storing and at the beginning of the season can prevent thatnever argue with an idiot, they'll drag you down to there level and beat you with experience.
Originally posted by GSXFJimJust remember.. Stupid hurts...
Comment
-
npnever argue with an idiot, they'll drag you down to there level and beat you with experience.
Originally posted by GSXFJimJust remember.. Stupid hurts...
Comment
Comment