Mesh Mod -----can't get to your Idle adjuster,,, Try this. It works great. I only mounted it with a zip tie, but it holds good and you only have to remove the fill door to adjust. To do this you will have to remove the tank and both sides of the fairings. The bolt that holds the adjuster goes accross all four carbs. You will need a small washer about the same thickness as the bracket so that you don't "bottom" out the screw and have loose carbs. After you get the bolt back in route the adjuster near where the oil fill is and zip tie it to the frame (I'm not sure of exact location just see pics) Put on the right fairing and try it out. Hope this helps. I couldn't post this in the mechanics forum so I posted here.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Schweet way to use your noggin! Great mod!
Cheers,
=-= The CyberPoet
__________________________________________________ ________
CyberPoet's Katana Maintence and Upgrade Parts Offerings
The Best Metal Steel Aluminum Motorcycle Tire Valves in the World, plus lots of motorcycle & Katana (GSX600F / GSX750F) specific help files.
Comment
-
Braaiiiinnsss....
Sorry, couldn't resist...
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
Comment