How do you clean this? It's the non fog inside to a HJC CL-15. I know it says not to touch it ever but how are you supposed to clean it up? It's a bit splochy from me wearing it the first time and not realizing i could just leave the visor open one click adn get mroe air. Thanks for any help.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Take the visor off the helmet. Fill your kitchen sink with warm soapy water. Mild dish soap recommended. And let it soak for a few minutes. Dry with a soft cotton towel.
Do not use any paper towel or paper based products ever to dry. It will leave scratches.
Comment
-
Originally posted by notecTake the visor off the helmet. Fill your kitchen sink with warm soapy water. Mild dish soap recommended. And let it soak for a few minutes. Dry with a soft cotton towel.
Exactly how I do the inside."I have told you all this so that you may have peace in me. Here on earth you will have many trials and sorrows. But take heart, because I have overcome the world."
JOHN 16:33
Comment
-
You think visors are dishwasher safe...?
Hmmm, time for an experiment!Florida, the only place where you need your windshield wipers and sunglasses. At the same time.
05/02 1216 Kabandit
18v Rigid Drill
Craftsman Rubber Mallet with duct tape mod
New Balance 765 running shoes from 10th Grade, with duct tape and super glue mod
Comment
-
just take off the visor. when you open it on the helmet there is a tab on each side under the visor, where the visor would be located if it were down, push the tabs to the back of the helmet and the visor pops out. i just use windex and a paper towel, no scratches works great.then just do the same thing to put the visor back in, push the tabs back and slide the tab on the visor into the slot on the helmet. batta-bing batta-boom. done. NEEEEEEXT!
ive got the same helmet just so you know. i do the same thing to mine and havent had any scratches from that.
Comment
Comment