OK this is above my headlight as you may be able to see, and I feel like a PO jacked up wiring somewhere along the line. I have loose wires hanging places. I am gonna try and clean it up with a little zip ties tomorrow, but i was moving this, and it just broke. Looks like it fried up at some point. My Question is what is it to though. Thanks
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
It's anyone's guess without tracing the wire. I suggest you hit up the Wiki and download the appropriate manual and have a look at the wiring diagram and from there you can trace it out.http://www.7thgeardesigns.com
http://www.lunchtimecigar.com
'90 Suzuki 750 Kat
"Shut up and drink your gin" - Fagin (Oliver Twist)
"But, as is the usual scenario with a Harley it was off-line when it crashed," Schwantz added dryly.
"You didn't hear what I meant to say" - my Son
-
My guess is that it's one of the connections for either the low beam, or high beams. They are pretty well known for overheating in that plug location.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Originally posted by steves View PostMy guess is that it's one of the connections for either the low beam, or high beams. They are pretty well known for overheating in that plug location.99 Katana 600
Comment
-
Bypass the plug, and use heavier connectors.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
i followed the harness, and it looks like it goes into the throttle side. I will bypass it though, and see what it does.
It is my headlights. Can anyone tell me which wire going in to the plug is my headlights? I do not have a manual at work to run through the diagrams.
it looks like the burnt wire is an orange wire, and the wire on the other end of the plug is a yellow striped wire. Sound about right?
Originally posted by steves View PostBypass the plug, and use heavier connectors.
That is the correct wire to connect it too.99 Katana 600
Comment
-
you got another wire there that's been cut as well (orange)
Like said bypass the plug , solder and shrink tube the repairBlood , its in you to give! http://www.blood.ca/
Comment
Comment