Anyone have a spare setup with the choke and horn and blinkers? I took it apart, the assembly looks fine, so i'm not sure why they will not work. Sometimes on the highway, with the vibration, one of the blinkers starts working. However at low speeds I have to use hand signals. Please advise. Thank you!
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
have you checked the flasher ?
doulbt it is the switch if both sides are having issuesBlood , its in you to give! http://www.blood.ca/
-
You are low on blinker fluid. Get some here.Chris
Originally posted by jetmerrittSave up for great gear and dress for the fall before you ride. If you can't afford good quality gear, don't ride. It's like saying you can't afford seat belts for your car. There are just no laws to make gear mandatory.
Comment
-
Well, you don't state what year your bike is... but I'll suspect it's a pre98, and that you've connected the wrong set of bullet connectors to the signals.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
I've seen lights that would come on and not blink because the bulbs were mismatched. I had to make sure that I had matching bulbs and the correct flasher for the application.--- 1992 Katana stolen from San Antonio ---
--- Bought a 1996 Katana 600 ---
Comment
Comment