If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
don't feel bad i wanted to know the same thing when i first got my katana. Short of removing everything and getting someone to fabricate you a frame out of aluminum which I really have thought about. The Katana is just a heavy bike. I love my Katana and when I first got it I thought it was going to be lighter and faster until I rode my buddies ZX6R, then I realized how slow and heavy it was. But I will tell you this go on a 400 mile a day ride with your buddies on there GSXR's and R6's and ZX6's and see who is still moving at the end of the day. *raises his hand* I am because mine is twice as comfortable as their's and will handle just as well. Later ~Heath
I see how old this thread is, but I'm fixing up a 2000 750 and will be doing some basic weight removal.
Center stand and fairings are already off (and I guess for sale if anyone wants them). The big debate now is whether I cut/grind off the body mount tabs.
-Chris
**if what I said can be taken two ways, and one of them offends you, I meant it the other way.
I fully understand some people actually like the whole naked look. Correction, I honestly think there isn't anyone the "likes" the naked look. I do believe there are people cheap enough to convince themselves they like it. Anyway, if you're trying to justify the decision by saying you're doing it to "save weight", seriously?
By removing the fairing you save less than 20 pounds. You lose the aerodynamics, though. The 600 especially doesn't have much power and Suzuki figured they needed to do what they could to make up for that. They put a lot of effort into getting everything they could out of that fairing (as I understand it, it was the first to be designed from the beginning using a windtunnel) and the benefits from smoothing the airflow outweigh (pun intended) the extra weight. If you're removing the fairing to improve performance, you're cutting your own throat.
As for the centerstand, the utility of having it more than makes up for the tiny benefit from losing that weight. Even when you're not doing maintenance, Having the bike more stable means you don't have to worry nearly so much about someone knocking the bike over. As a dad, that's actually a big concern for me!
I've seen that alot around these forums. "I want to reduce the weight of my bike so I'll take the center stand off". But then you take the center stand off and realize it doesnt even weigh 10 lbs. Then you need swap out your rear tire, and your like Sh**, I shoulda never took that dang thing off cuz now how am I gunna get the tires off the ground? Oh well, I guess I'll just have to pay a shop to do it for me. BAM! Cost yourself extra hard earned $$$ for less than 10 lbs on a heavy STEEL bike.
Im no professional but I like to consider myself more mechanically inclined than the next guy. Having said that, most of my friend's bikes end up in my garage when they need maintenance. I cant specify enough how much of a pain in the butt it is to work on a bike on the kickstand. If you dont have some kind of lift, your gunna kill yourself trying to get the tires off. Case in point, I had a buddy try to change his back tire by lifting his bike with a bottle jack. lets just say, thats not exactly the smartest way to get a 500 lb machine off the ground.
The center stand has been spared for now, but I'll still probably remove it. I have rear-stands that are safer and easier to use.
As for the 18+ lbs of fairings and 10+ lbs or gauges and lights that I took off, I don't think 30 lbs is insignificant. it's the difference between a full tank and an empty tank of fuel.
I think I can get to a 15% weight reduction, and under 500 lbs. wet when all is said and done. And that's without going nuts and cutting the sub-frame or anything.
-Chris
**if what I said can be taken two ways, and one of them offends you, I meant it the other way.
Comment