Is there a secret that will allow me to get the gas cap off this 89 Katana 750 with no key? The PO gave me a key, but it does not seem to work. Notably, it is also different than the ignition key (is this normal?). I've been soaking the lock in penetrating oil for about 12 hours now with no luck.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Gas cap off with no key?
My Bikes/Current: 1989 Suzuki Katana 750, 1980 Honda CB900C, 1973 Suzuki TS100, 2007 Yamaha Vino. Former: 1981 Honda CB650, 1982 Yamaha XJ550 Maxim, 2001 Yamaha V-Star, 1980 Yamaha 400, 19?? Suzuki Madura, 1974 Triumph T140E.Tags: None
-
Originally posted by arsenic View PostNo, that's not normal. Usually you only need 1 key for everything.My Bikes/Current: 1989 Suzuki Katana 750, 1980 Honda CB900C, 1973 Suzuki TS100, 2007 Yamaha Vino. Former: 1981 Honda CB650, 1982 Yamaha XJ550 Maxim, 2001 Yamaha V-Star, 1980 Yamaha 400, 19?? Suzuki Madura, 1974 Triumph T140E.
Comment
-
1) Try the other key
2) Try flipping the key (turn it 180*)-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Remove the tank from the bike. Empty the tank. Remove the fuel sensor.
If you have a key that is correct, then spray lube onto the 2 latches from the fuel sensor side. Spraying oil into the lock portion isn't going to do much for you, that isn't where it's sticking nomrally.
If you do not have a key and that is why it won't open, then you can try using a long screw driver or pry bar to force the latch open from inside through the fuel sensor hole. If you can get one to move, both will (they are linked) and that will help get it open if you need to replace the cap entirely.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by Kreylyn View PostRemove the tank from the bike. Empty the tank. Remove the fuel sensor.
If you have a key that is correct, then spray lube onto the 2 latches from the fuel sensor side. Spraying oil into the lock portion isn't going to do much for you, that isn't where it's sticking nomrally.
If you do not have a key and that is why it won't open, then you can try using a long screw driver or pry bar to force the latch open from inside through the fuel sensor hole. If you can get one to move, both will (they are linked) and that will help get it open if you need to replace the cap entirely.
Krey
Is that supposed to be coated in black tar?
That doesn't look right.
Well, THERE'S your problem.
I had a similar problem with a Yamaha tank once. I eventually cut it in half and made a clock out of it.
My Bikes/Current: 1989 Suzuki Katana 750, 1980 Honda CB900C, 1973 Suzuki TS100, 2007 Yamaha Vino. Former: 1981 Honda CB650, 1982 Yamaha XJ550 Maxim, 2001 Yamaha V-Star, 1980 Yamaha 400, 19?? Suzuki Madura, 1974 Triumph T140E.
Comment
-
Originally posted by arsenic View PostIf your gas tank and petcock look like that, what do you think the carbs look like?
My Bikes/Current: 1989 Suzuki Katana 750, 1980 Honda CB900C, 1973 Suzuki TS100, 2007 Yamaha Vino. Former: 1981 Honda CB650, 1982 Yamaha XJ550 Maxim, 2001 Yamaha V-Star, 1980 Yamaha 400, 19?? Suzuki Madura, 1974 Triumph T140E.
Comment
-
Hope you can save the tank, I would just save my effort and find a better one. Try the rust dissolving chemicals that are out there."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
Clean the tank well. I'd suggest not using an acid that will remove any good material. If you do clean it and it does not leak, then por-15 it and your set.
If it leaks... you may want to asses how badly it is. If just one or 2 small spots I would fix. If it was a whole section paper thin... time to move on to a better tank.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by Kreylyn View PostIf it leaks... you may want to asses how badly it is. If just one or 2 small spots I would fix. If it was a whole section paper thin... time to move on to a better tank.1998 Katana 750
1992 Katana 1100
2006 Ninja 250
2006 Katana 600 RIP - 130k miles
Comment
-
Originally posted by shpielers View PostA leaky tank can be fixed? Leaky as in with holes in it, or as in bad gaskets?
As in holes.
The tank is metal and can be welded safely when properly cleaned. If it's a large section you can even cut it off and replace with new sheetmetal if you have the skills to shape/work it.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by Kreylyn View PostClean the tank well. I'd suggest not using an acid that will remove any good material. If you do clean it and it does not leak, then por-15 it and your set.
If it leaks... you may want to asses how badly it is. If just one or 2 small spots I would fix. If it was a whole section paper thin... time to move on to a better tank.
Krey"I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
Just to update, I WAS able to save this tank. It took a couple of weeks of soaking it in CLR and water with a bunch of sheet metal screws added to give it some abrasive cleaning action. Periodically, I would drain it and wash it out with dish washing liquid before refilling it. When I finally stopped having large chunks of gunk coming out with the rinse, I used an Eastwood tank sealing kit. This seems to have done the trick.
I was NOT able to save the gas cap--at least not the key-lock mechanism. After a professional locksmith was not able to get it off, I drilled out the pins and opened it with a screwdriver.My Bikes/Current: 1989 Suzuki Katana 750, 1980 Honda CB900C, 1973 Suzuki TS100, 2007 Yamaha Vino. Former: 1981 Honda CB650, 1982 Yamaha XJ550 Maxim, 2001 Yamaha V-Star, 1980 Yamaha 400, 19?? Suzuki Madura, 1974 Triumph T140E.
Comment
Comment