I ride a 93 GSX750f with 13,500 miles on it, it started leaking oil real bad. I saw a few drops when I bought it, but not this bad. It's almost entirely coming from the valve cover or the "radiator" hose connections on the engine.
Does anyone have torque specs? Also is there anything I should do while the valve cover is off? The bike doesn't like idling until it warms up. Then once it's warmed up if I turn it off it doesn't like to start back up. I'm gonna do new plugs and wires and make sure the carbs are set right.
Just asking if there is anything I should do while it's apart. I think it has a vacuum leak still, when I rev up it stays high for a couple seconds, but does drop down. Oh! And what brand parts is recommended?
Does anyone have torque specs? Also is there anything I should do while the valve cover is off? The bike doesn't like idling until it warms up. Then once it's warmed up if I turn it off it doesn't like to start back up. I'm gonna do new plugs and wires and make sure the carbs are set right.
Just asking if there is anything I should do while it's apart. I think it has a vacuum leak still, when I rev up it stays high for a couple seconds, but does drop down. Oh! And what brand parts is recommended?
Comment