So as i was going to drill out the plug for my af / pilot screw. It was late and i said " ah ive seen the pic plenty of times" So as i left the manual and diagrams and all common sense in the house i being to drill. Whoops. Yup i drilled what i thought was the plug. Now i need help determining what exaclty i drilled and how to replace it. Picture attached
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Is that the plug from drilling the idle passages into the throat?
You might be able to plug the hole you drilled with some JB Weld. Might be a better fix by gluing a plate over the hole with a thin smear of JB Weld and then capping the plate with more to make sure it's sealed up well. You could use the bottom of a beer can for the plate material.
Comment
-
It can't be impossible to find a brass plug of that size. Measure it, and google for it.Any and all statements by Loudnlow7484 are merely his own opinions, and not necessarily the opinion of Katriders.com. Anything suggested by him is to be followed at your own risk, and may result in serious injury or death. Responses from this member have previously been attributed to all of the following: depression, insomnia, nausea, suicidal tendencies, and panic. Please consult a mental health professional before reading any post by Loudnlow7484.
Comment
-
Here's a 600 set:
carburetors carbs Suzuki GSX600F Katana 600 98-06
Here's a 750 set:
carburetors carbs Suzuki GSX750F Katana 750 98-06
I got it covered.
Comment
Comment