I have a question about my cluch. Mine starts grabing about 2/3 of the handle being let out. Does that mean it is almost going? I have adjust it from the handle bars. Can it be adjusted from the tran?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Suzuki says their clutches should last a minimum of 20k miles in city (stop-n-go driving) if you treat it nicely. Most riders get far more than that out of their clutches because of highway miles (where you don't tend to use the clutch at all for long distances).
MD86 has it down pat -- when the RPM's change without a speed change, time to replace the clutch. Most people run through a couple clutch cables before that happens (far more likely for the cable to stretch, bind or break).
Cheers,
=-= The CyberPoet
Comment
-
after i started feeling my clutch slipping heavily on the highway, i thought it was worn so i took it appart. the disks were mint. added a set of heavy duity springs and now it grabs much better. no slip at all. the heavier clutch pull can be a bit annoying in the city though.
Comment
-
Originally posted by smoubaraafter i started feeling my clutch slipping heavily on the highway, i thought it was worn so i took it appart. the disks were mint. added a set of heavy duity springs and now it grabs much better. no slip at all. the heavier clutch pull can be a bit annoying in the city though.
(A) The clutch pads were actually glazed a bit from slipping them excessively (like trying to wheelie the bike, or high-RPM take-off's);
(B) The oil you used (or an oil previously used) was API SJ, SL or SM, was marked "energy conserving" in the API spec ring, or an oil or oil additive was used that had one of the three big no-no compounds in it when it comes to wet clutches (teflon [poly tetrafluoroethylene or PFTE], moly [molybdenum disulfide], graphite);
(C) The springs were too weak in general (very rare, esp. if they are routinely replaced at time of clutch pad changes).
Cheers
=-= The CyberPoet
Comment
Comment