Will the pre 750 sprocket cover fit the pre 600?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
all the covers should be the same...
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
-
Yes.
If you compare the '95 600 and 750 fiches on RonAyers' website you'll see that while they don't list a non-discontinued sprcket cover for the 600, both the discontinued ones also show up on the 750 fiche. (Which does list a non-discontinued cover.)
Comment
-
ok well im going to get a pre 750 sprocket cover found one cheaper than the pre 600 sprocket.i just really need the arm theats inside of the sprocket because the little piece of the top of the arm that connects to the clutch cable broke in 2 piecesso i just really need the arm but yea i'll probably end up replacing the wgole cover.unless theirs anybody on here that has a pre 600 sprocket cover for cheap??cheapest one i found was $22.13 on ebay with shipping let me know if anybody has one
Comment
-
I just sold one for $20 on ebay.
An option: Pick up a clutch master cylinder, hose, sprocket cover and slave cylinder from a '89-'92 GSXR-1100, cut the clutch pushrod to fit (I can look up the exact length if you're interested) and never have to worry about adjusting or replacing a clutch cable again!
Comment
-
I like the sound of that. I think so far on the cages I prefer the hydro ones anyhow.My Addiction (94 600 Kat)
Addicted to Modification since... 1995!
Electrical Tape, Zip-Ties, and Rivets are more like accents then eye sores.
Comment
Comment