[IndyGunner]

I believe so, but lets wait for a second opinion

[overboost07]

ok im pretty sure that is them theyre brass and have a tiny little hole in the center, i know the picture quality is really cruddy its from my phone.... -cory

[overboost07]

ok i got those pesky little caps off and turned them all the way in and backed them out 2.5 turns, btw is there anything else i should do before putting the carbs back on? they look really clean

[Court93kat]

The longer screws "sideways" coming out of the bottom of the carburetors are the drain scews for the carburetor bowls. Just look them over really well and make sure things look good before you put them back on. Make sure the boots seat properly when reinstalling or you will have a vacuum leak.

[overboost07]

ok i got everything back together, i must say it starts easier revs faster, and i took it on teh road and theres a big difference in power, thanks you guys you really got me through that ive never messed with carbs in my life and i couldnt have done it without ya!!!

[Court93kat]

What you did was relatively easy. Next time take it a step farther and tear them completely down for a good cleaning. Now THAT is a fun afternoon.

But no worries... Carbs 101 is your friend since you have a pre.