ignition advancer change

[edub]

i'm getting ready to swap out my 06' 600 motor with an 06' 750 and i know i need to get a new jet kit from ivan , but will i be able to use my 600 factory pro ignition adv in the 750 ?

[Tmod]

Factory Pro is showing RTR-Suz-2 for the 06 750 and RTR-Suz-2-05 for the 06 600.

I have no idea what the difference is, I am sure arsenic knows the diff between those two engines.

Tmod

[The CyberPoet]

Yes, you can use the same advancer in any 88-06 Kat 600 or 750.

Cheers,
=-= The CyberPoet

[Sasquatch]

Yes, you can use the same advancer in any 88-06 Kat 600 or 750.

Cheers,
=-= The CyberPoet

Yep, says so right on the package

[steves]

I'd get the motor going good stock first before messing around with a jet kit.

[VifferJim]

I'd get the motor going good stock first before messing around with a jet kit.

baseline yer kitty...

[edub]

I'd get the motor going good stock first before messing around with a jet kit.

why's that ?

[The CyberPoet]

why's that ?

A lot easier to trouble-shoot the stock configuration and resolve the problems than to add aftermarket hardware and not know if you're troubleshooting problems with the add-on or with the bike's non-modified stuff.

Cheers,
=-= The CyberPoet

[MadKatter]

We don't know the condition of your 750 motor. It's normally a good idea to get the motor running up to stock performance in it's new home before trying to improve from an unknown baseline.

[edub]

We don't know the condition of your 750 motor. It's normally a good idea to get the motor running up to stock performance in it's new home before trying to improve from an unknown baseline.

it's an 06' with less miles on it than my 06' 600 . the problem i'm having is finding carbs that are any newer than 99'. i'll run it for a while w/o the jet kit and ignit. adv. and see what happens.