Tweet
The 06 stock exhaust is a little longer so the rear bracket doesnt line up. Can I get the rear foot peg of an '06 to solve this?
-
-
Really? Are you sure you've got the exhaust pushed in all the way?None of us are as dumb as all of us.....
“To do what ought to be done, but would not have been done unless I did it, I thought to be my duty.”
-Robert Morrison
"well, i havent beat katana hero on expert level yet chris" -katanawarrior
"I believe in the free speech that liberals used to believe in, the economic freedom that conservatives used to believe in, and the personal freedom America used to believe in"
-
The headers are the same, ditto the exhaust cans.
I agree with phil -- I suspect you don't have the mid-pipe connection pushed all the way in.
Cheers,
=-= The CyberPoetComment
-
First hole lines up perfectly, the one by the rear foot peg is about 1.5" farther back so Im sure it is pushed all the way in at the collector. I can also see the difference in the bracket location if I put the old & new one next to each other...Comment
-
-
That would require cutting and re-welding it, if the newer foot peg matches up it would look much cleaner...Comment
-
Nah, all you need is a piece of steel that will bridge the distance...
Cheers,
=-= The CyberPoetComment
Comment