I had my 89 600 running very well then I used some seafoam (of course I forgot to put a fuel filter on and about 20 miles into my next ride the bike started dieing (like the carbs were gumming up). As I pulled to the side of the road the bike was only running on 2 of the 4 cylinders. I trucked the bike home and cleared the carbs again. The carbs had some crap in them; however after cleaning and putting them back onto the bike the bike will not stay running and when it fires there is a clunk (like something is hitting on the top end). Could anyone give me an idea as to what the problem is? The carbs are now totally clean now but I don't want to keep trying to start the bike if I have bent something
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
Comment