Ok, so I fired up the b12 motor today for the first time, I let it warm up for a good 20 minutes with a fan on the oil cooler.
Then I set the idle to 1750 and proceeded to sync the carbs.
I noticed that carb #1 seemed to be acting funny on the gauge, like it was spitting air out instead of sucking air, and the gauge just bottoms out every now and then.
I took this video of the sync gauges while it was running.
Any one have any ideas was to what could be wrong?
Then I set the idle to 1750 and proceeded to sync the carbs.
I noticed that carb #1 seemed to be acting funny on the gauge, like it was spitting air out instead of sucking air, and the gauge just bottoms out every now and then.
I took this video of the sync gauges while it was running.
Any one have any ideas was to what could be wrong?
Comment