Checking my ebay head for a an 03 600 I noticed no oil pipe for # 1 cylinder. Does anybody know if it's supose to have one. The head is off an 02 and looks new and doesn't appear to have been tampered with. It might be a drain hole but the rest of them have oil pipes in them. If anybody has their valve cover off would you confirm if you have oil pipes on all cylinders. These are the copper oil pipes connected to the sparkplug wells and the plates at the bottom of the head. I'm thinking it's a drain hole for the oil when the sidestand is used or for draining the plates. I'll know for sure when I pull mine down but haven't done so yet, waiting for my headgasket and orings to get here. Thanks guys.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
alright man your doin this all wrong. what you need is the oil bypass kit from kaleco. Modern synthetic oil is very expensive - so why run the risk of getting it dirty by running it through your motor block? KaleCoAuto bypass kit comes with everything you need to run the oil around your motor block where it will do more good. Oil runs cooler, and as a result, there may be horsepower gains!
i would strongly recomend picking one up here:
Fo Sho.
Comment
-
Originally posted by Built4Speeedalright man your doin this all wrong....
i would strongly recomend picking one up here:
http://kalecoauto.com/index.php?main...&products_id=8
Cheers,
=-= The CyberPoet
Comment
-
Originally posted by Built4Speeedalright man your doin this all wrong....
i would strongly recomend picking one up here:
http://kalecoauto.com/index.php?main...&products_id=8
I'm not even sure if I was supposed to laugh or not.
Greg
COURAGE -
Freedom is the sure possession of those alone
who have the courage to defend it.
First Sergeant(Ret) - US Army - 21 years
Comment
-
ohh you like that? try this to....
You've heard of the Y pipe.. the X pipe.. the H pipe.. nothing can touch the O pipe!!! It provides 100% back pressure feedback on ALL engines!! Torque increase and kuneutson valve float brings in much lower revs so you don't hurt your motor! Not CARB Legal.
what did the customers have to say?
by Biggie Slaggs Date Added: 01/03/2006
My Honda was making all sorts of strange noise when I drove it. I took it from muffler shop, to muffler shop, and no one could seem to fix it. That's when I discovered the o pipe. After affixing this to my engine, there was only one loud POP, and no more exhaust noise ever again!
Rating: 4 of 5 Stars [4 of 5 Stars]Fo Sho.
Comment
-
Originally posted by The CyberPoetEverything at KaleCoAuto.com is humor. It's where you'll find listings for blinker fluid and muffler bearings
Cheers,
=-= The CyberPoet
I just never heard of it before.
Greg
COURAGE -
Freedom is the sure possession of those alone
who have the courage to defend it.
First Sergeant(Ret) - US Army - 21 years
Comment
Comment