How to mod for clearance
Well I got it bolted in there, but there is a clearance issue that needs some fabrication to solve.
The 1127 cylinder head is about 17mm taller than the 750. I had to take the breather cap off to clear the frame.
I need those 15mm cleared away, or at least 10mm. I'll probably have to mod the breather cap and the frame.
Well I got it bolted in there, but there is a clearance issue that needs some fabrication to solve.
The 1127 cylinder head is about 17mm taller than the 750. I had to take the breather cap off to clear the frame.
I need those 15mm cleared away, or at least 10mm. I'll probably have to mod the breather cap and the frame.
![](http://i619.photobucket.com/albums/tt277/BuffaloBill_1100G/90-GSX750F-1127GSXR/bolted%20in-s_zpsalwjmn6r.jpg)
Comment