i have a 97 kat and dont have alot of $ to change the whole exhaust so i purchased a d&d slip on from ebay 2 right side ones like a moron. so i just put on the right side welded it and sounds great. the shop said i cant put the other right side on the left so i drilled some holes in the stock muffler to make it sound even. will i lose hp by drilling the hole? it sounds pretty good but i want to make sure im not damaging my engine by doing this. can anyone help me? thanx
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Originally posted by bennyblanco View Posti have a 97 kat and dont have alot of $ to change the whole exhaust so i purchased a d&d slip on from ebay 2 right side ones like a moron. so i just put on the right side welded it and sounds great. the shop said i cant put the other right side on the left so i drilled some holes in the stock muffler to make it sound even. will i lose hp by drilling the hole? it sounds pretty good but i want to make sure im not damaging my engine by doing this. can anyone help me? thanx
Pictures of what the problem is would help greatly.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
ill try to get a pic for you to show you so you can help. but on the other side where i have just the stock i drilled some holes near the center hole. i made like 10 little circles around the center. it sounds pretty good but i am damaging the engine or can i run like that? one d&d and one stock with the drilled holes
Comment
-
Originally posted by bennyblanco View Postill try to get a pic for you to show you so you can help. but on the other side where i have just the stock i drilled some holes near the center hole. i made like 10 little circles around the center. it sounds pretty good but i am damaging the engine or can i run like that? one d&d and one stock with the drilled holes
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
Comment