Wayyyyyyyy too cool
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Originally posted by 91talon View PostYou're an evil person. Making me want to spend time and money on my bike rather than my wife...
OK, so here's the scoop.
It's gorgeous outside and my bike was in pieces...sooo
I didn't get to fully finish the parts, they are somewhat cloudy and not to a full shine...but the bike is back together. I needed to ride!!! So, I am going to try to finish buffing/polishing while the bike is together...don't know how well thats going to work, although may work out better since there is something to press against.
I will take some pics today of the "as-is" state...it's not bad, but not very shiny.
Comment
-
Do you have any problems with the peices fitting together at the body seams with the extra thickness? you've got great patience, that work is very tedious. Cant wait for more pics.92 Kat 600
mods so far:
-96 750 engine -04 gsxr1000 rear fairings -02 gsxr 1000 6" rear wheel -and f upper fairings -190/50r17 tire -custom extended swing arm -02 gsxr rear brakes -520 chain conversion -gsxr forks and front end -undertail exhaust -04 yam r1 pegs and shifter -750 rear suspension -+2 rear sprocket -minus 1 f sprocket
www.myspace.com/waltwallace
Comment
-
Originally posted by Theric View PostOK... Some more pics
This is taking forever as I have a ton on my plate right now with School, work, moving, ect...
I am hoping to get this done by end of next week. But realistic goal is 2 weeks.
I have started sanding and uh...
I didn't want to burn right through the resin, so I started with 320 grit...not enough, then went to 220, then 150, and finally 80
I am starting with 80 to take it down to a level surface, then will work up from there.
All pics are still before sanding....
Front Fender:
Solo Cowl:
Tank:
Tail (tape is to mark off grab bar section..no need to CF that):
seriously, camera phone. wtf? no.
cant get a good view of yer stuff.
why do folks insist on using nasty blurry poor cameraphones to take pics of something cool.
See My Garage for mods...
T-Rex Racing framesliders install and review thread
Full Post 98 LED conversion how to thread
Comment
Comment