Tweet
Greetings all. I removed my rim that came with the bike and now need to figure out what it is. It measures 17" x 5 1/2", all the markings are removed as it had been chromed. It currently has an almost brand new CONTIMOTION 180/55zr17 on it.
-
-
gsxr 600
Built up Black 94 5.0 Mustang - Champagne Pearl 2001 Chrysler LHS - Canary Yellow 2001 Katana 600 - 94 F350 7.3 IDI turbo crew cab dually -
If it uses a 20mm axle then it's most likely a bandit 1200 rim.
GSXR 600 92-93 wheels had 5 slot cush drives, not 6.
The change from curved spoke to straight spoke GSXR wheels also changed axle sizes to like 28-32mm axles...
The Bandit 1200 is the primary straight spoke 6 slot cush drive that still used the 20 mm axle. That would be my guess.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"Comment
-
well it does have a 22mm castle nut on it
Any idea if the brake rotor will swap over?Comment
-
Swap over to what?1992- project katfighter
2005- GSXR750
2001- TL1000R
http://katriders.com/vb/showthread.php?t=111130
www.lunchtimecigar.com
KATRIDERS RALLY 2014 - cintidude04
KATRIDERS RALLY 2015 - cintidude04
KATRIDERS RALLY 2016 - cintidude04Comment
-
Should have the same rotor bolt pattern for the post kat and most every other 4.5-6" wheel.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"Comment
Comment