So, I ordered a 13 tooth front sprocket yesterday. Just wondering how hard it is to change this out. Thanks in advance.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Comment
-
Originally posted by md86 View PostMe too .I just used my big-a$$ tourque wrench set to like 120 ft/lbs and stood on the rear brake . Popped right off . Done that a few times with other's bikes as well . Only had to use the broom trick once or twice .
Now I don't feel so bad! That impact wrench has saved my life on so many issues with my bike!-
-
I poured spot remover on my dog. Now he's gone.
Comment
-
Any reason you went 13T in the front? You are going to wear your chain out pretty fast.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Do a search for broken chain, you should see a few pretty nasty puctures. Chain breaks are not good news when you're riding at highway speed, or any speed for that matter.
Get a good RK or EK chain...they're not that expensive.-
-
I poured spot remover on my dog. Now he's gone.
Comment
-
i got installed a 14 dents in the front sprocket wich egal to +3 dents for the rear sprocket and its dosent bent the chain since its garanted by suzuki dealer and the guys told me anyone do it . but 13 dents look a bit too much and not recommanded since its cause a stress on the chain and will make it damaged very fast
you must change 2 sprocket + chain at the same time its can be dangerous to put a 13 ft and dont change the chain and rear sprocket !Last edited by mathsmart; 10-07-2008, 02:06 PM.
Comment
-
Originally posted by mrtoofast4u View PostWhat length chain should I get? It's got the stock rear sprocket and then 13t front sprocket.-
-
I poured spot remover on my dog. Now he's gone.
Comment
Comment