If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I was cleaning my kat, getting the old gunk from the front sprocket and noticed some (side to side) play in it. Should this play be there and how much??
I tried the search and found nothing.....
2001 Kawasaki zx1100
2000 Kat 750, in 600 Yellow. (GONE but not forgotten)
Is the play on the sprocket/shaft, or is it just the whole shaft? Play is not good for either, but play in the shaft would be worse. Is the retaining nut still tight?
The Sprocket itself seems to be the problem, like its missing a washer? its not a large amount of play, but I can wiggle it side to side. The nut is tight.
2001 Kawasaki zx1100
2000 Kat 750, in 600 Yellow. (GONE but not forgotten)
Could it possibly be the wrong nut on there? I know the nut is recessed on the back side so that it can fully grip the sprocket.
Pics Pics
No pics yet
Just because they sound the same doesn't mean they are: there≠their≠they're; to≠too≠two; its≠it's; your≠you're; know≠no; brake≠break
The 98+ models ship from the factory with 'em, but they're not listed in the 98+ fiche for some reason (Malloc & I almost scratched our skulls raw trying to find a fiche file for any year 98-06 that had 'em and never succeeded).
Comment