So I was searching and didn't see it mentioned but when I was on their sit there are a few options Mainly standard lines or race lines. So what's the difference and which one is the way to go for my 93 Kat 750. Thanks in advance
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
if going for a full set, st one piece rear, and 2 piece front.
the normal front brake line setup is 3 piece front.. one line to a splitter, then one line each to the calipers.
get the set that goes 2 front lines.. one line to each caliper straight from the master cylinder, and deletes the splitter. is not only better, but easier to bleed too.
I have a HEL set on my 2001, it was like a whole new braking system.... one finger stops.
See My Garage for mods...
T-Rex Racing framesliders install and review thread
Full Post 98 LED conversion how to thread
-
HEL 2 line set-up is the way to go IMHO.1992- project katfighter
2005- GSXR750
2001- TL1000R
http://katriders.com/vb/showthread.php?t=111130
www.lunchtimecigar.com
KATRIDERS RALLY 2014 - cintidude04
KATRIDERS RALLY 2015 - cintidude04
KATRIDERS RALLY 2016 - cintidude04
Comment
-
grats, I have the HEL lines too and they work great. after you install them take a look at the travel while pushing the front down a few times. if it hits something try to zip tie the two lines together a few inches above the area it hits. worked for me2015 BMW S1000R
Comment
-
Originally posted by JayBell View Postif going for a full set, st one piece rear, and 2 piece front.
the normal front brake line setup is 3 piece front.. one line to a splitter, then one line each to the calipers.
get the set that goes 2 front lines.. one line to each caliper straight from the master cylinder, and deletes the splitter. is not only better, but easier to bleed too.
I have a HEL set on my 2001, it was like a whole new braking system.... one finger stops.
Just put the same setup on Cyndi's '04, coupled with the Pazzo's...Well, I'm a bit jealous.sigpic
"* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick"
2004 Katana 600 - Bought 01/06/2017
1993 Katana 600 - Traded for a truck.
2004 Katana 600 - Gone
2002 GSX-R600. - Gone
Comment
-
Do u guys have any pics of how u did the two lines coming out the master cylinder to the front and what kind of fittings will I do to change it from the one line out to the two. Thanks in advance----USMC combat vet----
07 Yamaha r6s & 93 Kat streetfighter project
Comment
-
Originally posted by bagndrag View PostDo u guys have any pics of how u did the two lines coming out the master cylinder to the front and what kind of fittings will I do to change it from the one line out to the two. Thanks in advance
Comment
-
Originally posted by arsenic View PostI'm pretty sure the HEL 2 line kit comes with one.90% of motorcycle forum members do not have a service manual for their bike.
Originally posted by BadfaerieI love how the most ignorant people I have met are the ones that fling the word "ignorant" around like it's an insult, or poo. Maybe they think it means pooOriginally posted by soulless kaosbut personaly I dont see a point in a 1000 you can get the same power from a properly tuned 600 with less weight and better handeling.
Comment
Comment