If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Terry is great! The install isn't usually that bad....
Terry actually PM me and quickly explained how to fit the spacers, sounds like a piece of cake. I've had the forks apart many times already, did the .99cent mod etc so no worries here.
I Had looked up the previously set at sport riding rider 180 and bike weight of 490 (says semi wet weight not sure the exact weight different places say 480-500) says i should have a 0.973kg/mm, they have 0.95 and 1.0 so Should I go up or down?
I installed the 1.0kg race techs on the front of my pre 750,. I Weight about 220. they work great couldn't be happier. that with the R6 rear made a great combo, and I only have about $200 into it.
Richard
I installed the 1.0kg race techs on the front of my pre 750,. I Weight about 220. they work great couldn't be happier. that with the R6 rear made a great combo, and I only have about $200 into it.
Richard
I couldn't agree more. Best money spent yet on the bike!
I ordered the 1.0Kg race techs! just after Christmas from Cheapcycleparts there still not here :-/ they say they are waiting for the manufacturer to send them but its not like I can ride the high for Sunday is 6. Maybe I should move south lol.
he got me all setup with a rear shock, fork springs, preload tubes. all setup (basically) for me perfect. couldnt ask for anything more! all i need to do now it change my fork oil! if only there was drain plugs in the forks!
Comment