looks like this:
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Originally posted by slamcoolOriginally posted by Black_peterlooks like this:
The little holes... maybe I could fit some additional gauges in them? hehehe
The two holes you see there are for the 600 clip ons. I have since used them to mount the latest gauge cluster.
Comment
-
Originally posted by Black_peterWell I thought it was hideous.. Compare that picture to what it looks like with the 600 Katana top tree (eBay $9):
The two holes you see there are for the 600 clip ons. I have since used them to mount the latest gauge cluster.
Comment
-
Originally posted by Black_peterOriginally posted by crazymofoolder (99-01) r6 clip-ons will go on too
below the top tripple plate, and will drop the bars down by some 2inches.... basicly any 46mm dia clip on will go on.
cheers.joe.
They are 41mm
but still, the R6 bars will work.
the earlier R6, cbr600, and the katana all share the same diameter forks
cheers.joe.
Comment
-
Originally posted by crazymofobut still, the R6 bars will work.
the earlier R6, cbr600, and the katana all share the same diameter forks
cheers.joe.
There are a some on ebay now. 10.50 each side..
What about the SV1000? or 650?
Comment
-
Originally posted by Black_peterThat's right.. I keep forgetting the R6 (up till 07?) had conventional forks..
There are a some on ebay now. 10.50 each side..
http://cgi.ebay.com/ebaymotors/YAMAH...spagenameZWDVW
FZR600R (94 on) 41mm
R6 (99-04) 43mm
R6 (05-07) 50mm
Other than that I found other 41mm:
Honda
CBR600 F1/F2/F3
Hawk 650
VTR1000 Firestorm
Kawazaki
ZX6E (93-97)
ZX6R (93-97)
Suzuki
SV650/S
Comment
Comment