New Kat Rider Member

[CALI_NATIVE]

Hello Kat Riders I just joined the Forum so i can find goodies for the Kat. And Also the good stuff all you guys and gals have found that works for the Kats, and the links for tech stuff and all around riding info.

Thanks

[Stan]

Welcome, no doubt you will find what you need here.

[Taybiker]

Welcome, you'll find everything you need here or somebody will help you out

[Slammer46]

Welcome and lots of both here.

[shpielers]

Welcome! What city you in? San Jose here.
Factory pro stage 1 jet kit and ignition advancer, rebuild/valved/sprung shock, racetech springs and emulators, and SS brake lines. Those are the most popular mods around. If they interest you, ask around, lots of info.

[JIB]

Welcome to KR

[zuma]

Hello Kat Riders I just joined the Forum so i can find goodies for the Kat. And Also the good stuff all you guys and gals have found that works for the Kats, and the links for tech stuff and all around riding info.

Thanks

And you'll learn there are a lot of good groovers here too. Welcome to Maggie's Farm.

[Javy23]

Welcome!!!...

[KatanaGSX92]

Welcome to KR!

[astevens54]

Welcome to KR.

[CALI_NATIVE]

Thanks To All For the Welcome now on to business . I am looking for some new tires and am looking at the Michelin Commander II Motorcycle Tire but the specs on the front are 130/90 VB 16 v250 the stock ones are 120/80 the dims are 10 mm larger do you think based on the size will this tire rub anywhere on the sides of the forks or the fender? 10 mills works out ot about 3/16 of and inch per side and on the height and these are looking better than the metzler i have on the front now which after about 3500 miles is already looking a little crappy. what do you guys/gals have to say ??
Thanks