hello to all kats

[quick]

Before I start just wanted to say hello to all.
I then want to ask if anyone can give me some information on the procedure to change the cam in a 600 to a 750. what do I need to change as for the cam bearings,washers etc. Is this a job where I can just swap the cams and everything will come back together or what do I need to change to get this to work?

[05RedKat600]

What year 600?

BTW, here is the thread on the subject: http://katriders.com/vb/showthread.php?t=75466

[stretched600]

Welcome and should be a drop in and go! Get the timing right of course

[05RedKat600]

Welcome and should be a drop in and go! Get the timing right of course

Um, no it shouldn't. Pre 600's were shim style, Pre 750's were tappet. That's why I asked what years he was looking at. Have to be careful which camshafts you get as they are far from drop in and go dependent on the year. Read the thread I posted, it tells you that.

[astevens54]

Hello.

[KatanaGSX92]

Welcome!

[Nut-Nut]

Hello, and follow what the internet-guy said...

Welcome ot KR

[Nero]

Welcome!

[Motomommy322]

Welcome to KR

[diavolo]

Welcome!

[ErrEs]

Welcome here.

[ratgti]

welcome to katriders..

[quick]

99 katana 600 cam swap

Its a 99 katana 600 swapping the cam's to a 750

[ratgti]

welcome......