My first bike and its a streetfighter-(project)

[portetra000]

1990 gsx750
First bought the bike for 500 no title. It had been used as a stunt bike after it was totaled in an accident that destroyed the front end. It only came with some fairings on it and I've always liked fighters so I started on this. My carbs were efffed so I ripped into them and found the previous owner had mismatched all the o-rings and the float heights. Basicly the bike looked like hellen keller had gotten ahold of it and a wrench. These are the pictures I have so far and what I have done. The bike is now titled and has about 18k on it

[gsxkat1100]

like hellen keller had gotten ahold of it and a wrench.

Welcome to KR!

[kazahara]

Welcome, looks like you have a nice project on your hands

[camarotool]

Welcome aboard

[diavolo]

Welcome

[KatanaGSX92]

Welcome!

[venturesomerite]

More and more Kats are getting fightererered.

Keep us posted!

[portetra000]

Update**
Ripped the ugly head gear looking cage off the front and put two lights in a ducatti style on the front and made a new gauge cluster



The gauge cluster wrapped in camo print

[1swifthawaiian7]

What were the wires(color) you used to cut in an splice those sweet tail lights

[portetra000]

What were the wires(color) you used to cut in an splice those sweet tail lights

Ill have to look and ill get back to you but i used the existing wiring harness and wired one side as the running light and the other as the brake light. There should be 3 wires one of them goes to the license plate light and i hooked that into a white led strip on my plate

[superbike]

One piece at a time brother, welcome to KR!

[portetra000]

Update*

I decided to lose the junk paint job and sprayed everything with a dark emerald flake green and used a gloss clear. This is post paint without any sanding or buffing. I also found out that the tailight setup i have is illiegal in my state so i have to get an r1 integrated tail.

[Noodles]

Looks good

[portetra000]