Need to break down and get a center stand

[AR-15]

I've been dealing with it, or without rather. Just makes service a lot easier. Since it never had one, I don't know what I need


98-2006 600/750 are the same?
bushings, 2ea?
springs, 2ea?
center stand stop?


I think that's about it, not sure. The original was probably removed at some time because there are two bolts with no bushings. But I think I'm missing the stop?

[shpielers]

If you look at a parts fiche, compare part #s to see if 600/750 are the same. Pretty sure they are, but not 100%.

[Kat Floyd]

I feel the same way. The PO of my bike took a lot of important stuff off like the center stand and rear pegs.
Im sure those "weight savings" were not worth it at all.

[92xjunker]

The center stand was an option on the 600, at least they were on the pre Kats.

[AR-15]

Per the fiche, all the parts crossover.

[dnelli]

Does anyone here know if a Vance & Hines Supersport exhaust on a 1990 GSX600FL interfere with a center stand?

[ZookRick]

Does anyone here know if a Vance & Hines Supersport exhaust on a 1990 GSX600FL interfere with a center stand?

Mine on my '89 750 doesnt

[dnelli]

Mine on my '89 750 doesnt

I just saw this today...hahaha I bit the bullet and found one on eBay for $29 shipped. Came with boomerang bracket and the two extension springs. I needed to buy the bushings and will buy the bolts at the local hardware store. Oh, I almost forgot....it also came with a $h!t-ton of grease, grit and grime that i needed to degrease. I painted it flat black and it looks new. Fits like a glove too! Thanks for the response dude.

[AR-15]

Good find!

[dnelli]

Good find!

this is just as good a deal for you:

http://www.ebay.com/itm/00-Suzuki-Katana-GSXF-750-Center-Stand-W-Spring-WH-/130748239169?hash=item1e7133cd41:m:m5TRgtl8wGL5PjESUjum6Fw&vxp=mtr

u need two spacers: SPACER 09180-10040

2 bolts: BOLT ea. 01580-1060B

1 CUSHION 09321-10017