Rear turn signal Ideas WITH REVIEW!

[Crackshot]

So, I have the generic short stock turn signals on (third pair). It seems that right at the base of the socket, the wiring keeps comming off of the base, thus causing me to replace the socket. By ordering new turn signals. It happened again, and I REALLY don't want to buy the same crappy signals again. Does anyone have any recommendations for not expensive signals that aren't stock? Mod's, if this is in the wrong section, feel free to wisk it away to wherever it belongs.

Thanks
Crackshot

PS. Flushmounts are a bonus


EDIT: REVIEW

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4616437722&ssPageName=STRK:MEWA:IT

Ok, I got those signals, here is my review:

I think they are poor quality, too dim, and too red for my tastes. They look alright but honestly, they don't look good enough to drill through my fairings for. I would not recommend these to anyone, ever. But, if you wan't to see a set, let me know. I already cut into the sticky pad to mount it, so I can't return mine. I'd be willing to send them to anyone for shipping costs (couldn't be more than 2 or 3 dollars).

PM me if you want them.

Thanks,
Crackshot

[paradoxmd]

here's a couple of ideas from ebay...

flush mount leds

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4616437722&ssPageName=STRK:MEWA:IT

standard flush mount with a wide choice of housing and lenses

http://cgi.ebay.com/Suzuki-Katana-GSX-600-600F-750-1100-FLUSH-TURN-SIGNALS_W0QQitemZ4617361892QQcategoryZ35580QQtcZphotoQQcmdZViewItem

hope that helps!

[Crackshot]

bought the first ones. thanks!

[paradoxmd]

hey let me know how they turn out and post some pics if you wouldn't mind. i'm interested in getting those myself.

[cancun black dog]

Put the intergrated light with the signals built in!!! They are bad ass!!! best 80.00 I have spent on the Kat!!! Really cleaned the rear up!!!

[SOUPDADY]

Post a few pics looking to do this in the future

[suzukisportrider2004]

step up to some higher quaitly parts

[md86]

I spent $20 on some little arrow leds and stuck them to the back . Works just fine .

[bigat06]

I've found some signals that hug the tag . Actuallly use the screw holes in the tag to mount to left and right side. Look like a tag frame at first glance. Haven't put them on yet....been kinda lazy.

[md86]

I spent $20 on some little arrow leds and stuck them to the back . Works just fine .

[goose491]

http://cgi.ebay.com/ebaymotors/AMBER-LED-MIRROR-TURN-SIGNAL-LIGHTS-AMBER_W0QQcmdZViewItemQQcategoryZ33717QQitemZ8044606500QQrdZ1QQsspagenameZWDVW

These go for about $20 constantly on ebay... they are the little arrows you see on a cars side mirrors. They simply stick to any flat surface.

I aim to put one on either side of my licence plate. ON the plate itself if there is room. I think it would be pretty stealthy.

N

[bigat06]

This is what I have. Need to install. [img] [/img]I hope this pic shows up.

[bigat06]

http://www.virtualinventories.com/vi... 2 post :oops:

[bigat06]

I think i finally got the pic posted

[jason05]

mine were unique and functional, and super cheap. i dont use them now (broke them pullin them out for my paint job), but i will probably wire up some new ones