Local equivalent for Suzuki thread lockers?

[Hoko]

On pages 1-3,4 in the Suzuki FSM it lists "special materials" to be used as instructed throughout the manual. I was wondering if there were local equivalents we could use for these.
Suzuki Super Grease "A" - for driveshaft oil seal, generator oil seal etc..
Suzuki Moly Paste - crankshaft journal bearing when installing, camshaft journal install
Suzuki Bond 1207B - sealer used between upper and lower crankcase, sealer on the top side of the Cylinder Head Cover gasket
Thread Lock Super 1303 - locks down cam sprocket bolt, cam chain guide bolt
Thread Lock 1360 - locks down brake rotor bolts
Thread Lock 1342 - locks down oil pump mounting bolt, starter mounting bolt
Thread lock cement - locks carburetor set screw

[GSXFJim]

Blue Loctite for threads, for the other stuff it's personal preference, I've always used engine oil to lube parts for assembly, hi-temp rtv for sealing cases where no gasket was used.
Go to the auto parts store and ask of pick up packages and start reading.

[indianboy7]

Suzukibond is the same as hondabond, Toyota fipg, and permatex ultra gray. Threebond makes the stuff for all the manufacturers.... http://www.threebond.com/product/ser...s/s_a1300.html