Can you use this paint

[R0v3R]

[ame]http://www.amazon.com/KUSTOMSHOP-LETTERING-ENAMEL-PINSTRIPE-COLORS/dp/B001CUAYC6/ref=sr_1_10?ie=UTF8&qid=1406127294&sr=8-10&keywords=hand+brush+automotive+paint[/ame]

In order to hand paint
- Fuel Tank
-Frame
-Front/Rear Fender
??


My main concern is it holding up when the frame heats up...
If anyone knows any products that would work best for hand brushing a bike feel free to post recommendations.

Thanks!

[GSXFJim]

that's for pin striping...

[R0v3R]

I know, I want to hand paint pinstripe type designs on the entire bike..

[GSXFJim]

ok, well sure then.. your OP simply stated 'hand paint' my assumption was that you wanted to use it to 'paint' the bike... not stripe it...

contact the kustom shop and get the MSDS on the product, it should give you info like that, or call and ask...

[subforry]

This is an enamel paint like One-Shot which is very popular for pinstripes. Not sure about heat and enamel. The main thing to keep in mind that that any solvent (fuel, paint thinner, etc) will damage it. If you put it on your gas tank you have 2 options. 1: don't spill when filling up. 2: live with it and be happy to remove and retry. A 3rd option is to use a 2 part clear coat over the paint. This stuff is really good

http://www.spraymax.com/index.php?id=361&L=1

Warning: I was told that enamel like One-Shot would ripple if used under a 2 part clear coat. I used House or Kolor pinstripe then the 2K clear.

Have fun. Oh check these guys out

http://www.coastairbrush.com/