i wanted to change my brake fuid but when i went to remove the two screws in the reservior cap one of the screws are striped .just sucks when i 'm ready to change the fluid with all my tools and something stupid happens like that. guess i gotta drill it out but where am i going to find the same exact screw
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
ronayers.com-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
-
I've replaced all mine with stainless hex head counter sunk screws.
Looks like this...
Front is 4mm X 12mm, rear is 4mm X 16mm
Can be purchased at lots of hardware stores and such like Ace hardware. If no luck locally or don't have a nuts and bolts shop, then simply order online.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
Comment