Tweet
i got a 98 kat 750 and was wondering if i could use a gsxr swing arm and rear wheel?
-
-
Search and you shall find. This question has been asked a few times, and the topic has been discussed a few times. -
A few million.Originally posted by squiggy View Post
Originally posted by arsenic93 octane fuel and K&N pod filters rock.
Comment
-
Easy answer is yes you can, but there will be some modification required.Kan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
-
ok were can i find this info?Comment
-
Originally posted by SlammedKat View Post
Forget about this. How do I put a Kat swing arm on my gixxer?
:repost"You can pour syrup on sh*t, but that doesn't make it pancakes"
Comment
-
I don't know if this will work..... http://katriders.com/vb/search.php?searchid=1166603
Originally posted by plucas_78 View Post
Any and all statements by Loudnlow7484 are merely his own opinions, and not necessarily the opinion of Katriders.com. Anything suggested by him is to be followed at your own risk, and may result in serious injury or death. Responses from this member have previously been attributed to all of the following: depression, insomnia, nausea, suicidal tendencies, and panic. Please consult a mental health professional before reading any post by Loudnlow7484.
Comment
-
Kreylyn is your best betOriginally posted by SlammedKat View Post
. He's not hard to find if your looking and you can save yourself alot of time
.
SliminatorComment
-
Its not a matter of fitting, its a matter of having a machinest to make you the required spacers to fit, and also having to chop your under tray to allow for the swingarm to pivot up high enough due to the hump.
If you don't know a machinest personaly, I would have Krey make one for ya, would prolly be a lot cheaper.
In my luck, I happen to know a machinest personally, and owe the man much New Castle!!!
Thanks Ne-Oublie!!!!!Kan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
-
Putting a GSXR swing arm on Kat.
1) Buy a GSXR
2) Remove Swing arm and tire
3) Throw away rest of bike
4) Attach GSXR swing arm to Kat
5) use the search function on the forum
:repost"You can pour syrup on sh*t, but that doesn't make it pancakes"
Comment
-
I have a GSXR1000 swing arm I'll sell you. Has the axle and pivot bolts. I think its an '06. Was going to do the same thing, but I move too much for work to have fun projects like that now...None of us are as dumb as all of us.....
“To do what ought to be done, but would not have been done unless I did it, I thought to be my duty.”
-Robert Morrison
"well, i havent beat katana hero on expert level yet chris" -katanawarrior
"I believe in the free speech that liberals used to believe in, the economic freedom that conservatives used to believe in, and the personal freedom America used to believe in"
Comment
Comment