yosh exhaust question for the bike

[MADKAT626]

hey guys i am looking at some new exhaust will not new but in a pawn shop it is only haft of the exhaust from the middle to the tip looks in good shop the quesion is i came off a hybusa dont know what year it is. would it fit on a 1993 katana 600 ?

[Psycho1]

If that's a Vance & Hines SS on your bike in your avtar, you would probably be better off just keeping what you already have. jmho

[MADKAT626]

i already have yosh rs3 exhaust but it is scrahed real bad

[Court93kat]

Madkat... you can get a sleeve for the Yoshi you have now and make it look brand new for not much money. If you are interested in doing that, I have the part numbers to order from Yoshi.

If you don't go that route and want a new pipe, let me know if you want to sell that Yoshi you have.

[MADKAT626]

that kool where do i get a sleve at for that

[Court93kat]

I contacted Yoshi directly on the phone. Once I got the part numbers, now I can just order the sleeve through them. I can't tell from your avatar picture if you have the same pipe I do or not. Mine has the slotted bands riveted to the sleeve holding it all together. It closely resembles the current RS-3 along with the stainless steel look. The version right before that has screws holding the sleeve in place and it has more of a dull finish. Just make sure to have some measurements handy when you call them. They will ask the length, diameter, etc. They can work with you though. You will have to move your Yoshi label from the current sleeve to the new sleeve though.

[MADKAT626]

ok thanx alot

[Court93kat]

No problem man. That is what we are here for.