bollard

[bollard]

We are having a problem routing the hoses on our Katana 600...where do the 2 hoses (similar length) coming from the carburetor go. There is no canister system on this machine and the idle speed cannot be stabilized...we suspect a vacuum or hose routing problem...we replaced the original gas tank with a California model and wonder if this could be a problem...there are no emission controls...our manual covers 1988 to 1996 models. Our model is a 1990 on which we have installed 1997 carburetors. Any suggestions or comments would be appreciated. Thanks!

[arsenic]

they drape over the air box, they connect to nothing, they are vent hoses. The carbs are the same on the 600 from 90-97 they are BST33SS.

[bollard]

Thanks for the reply Arsenic...we were uncertain about their purpose and routing...they appeared to have some influence when moved around.