Recently got a 2001 katana. Wasnt running and owner said he burnt out the clutch. I got her running, how clutch did turn out to be slipping so i assume it is burned out. Purchased new fibers because the old ones showed obvious signs of being burned,
EBC Brakes CK3357 Clutch Friction Plate Kit
Thats the plates i purchased off of amazon, says it fits my bike. However, now when i put the plates and fibers in the plate that bolts the springs down on doesnt seem to sit far enough into the basket. It just seems as if there are too many plates and steels,however I counted 8 plates and 7 steels like is in the OEM picture, why isnt my main cover/pressure plate sitting flush. I have tried adjusting the clutch push rod but this isnt right it seems because It pulled fine with the old plates, now it feels like it the push rod is hitting something solid because i've adusted it so far in because the pressure plate is a bit farther out/
EBC Brakes CK3357 Clutch Friction Plate Kit
Thats the plates i purchased off of amazon, says it fits my bike. However, now when i put the plates and fibers in the plate that bolts the springs down on doesnt seem to sit far enough into the basket. It just seems as if there are too many plates and steels,however I counted 8 plates and 7 steels like is in the OEM picture, why isnt my main cover/pressure plate sitting flush. I have tried adjusting the clutch push rod but this isnt right it seems because It pulled fine with the old plates, now it feels like it the push rod is hitting something solid because i've adusted it so far in because the pressure plate is a bit farther out/
Comment