If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i am sort of new to motorcycles but what motor is this is this the 600? cuz this is whats on my bike and i was under the knowledge this was a normal 600. i have an 89 kat
That looks to be a 1988 Katana 600 engine. Right at the bottom of the cylinder block, it says the displacement, but I can't make it out in the picture. The 88 600 is the only one I know of that had a smooth valve cover instead of a finned one.
Any and all statements by Loudnlow7484 are merely his own opinions, and not necessarily the opinion of Katriders.com. Anything suggested by him is to be followed at your own risk, and may result in serious injury or death. Responses from this member have previously been attributed to all of the following: depression, insomnia, nausea, suicidal tendencies, and panic. Please consult a mental health professional before reading any post by Loudnlow7484.
it DOES have fins....... that picture is deceiving....
Good f*n memory, btw!
Any and all statements by Loudnlow7484 are merely his own opinions, and not necessarily the opinion of Katriders.com. Anything suggested by him is to be followed at your own risk, and may result in serious injury or death. Responses from this member have previously been attributed to all of the following: depression, insomnia, nausea, suicidal tendencies, and panic. Please consult a mental health professional before reading any post by Loudnlow7484.
Comment