The exhaust is a a Bandit 1200 (hence the b-12 motor!) Holeshot Comp2 full system and highmount can. Canister length is 14", whereas the stock pipe on the kat is somewhere closer to 20". (18"?)
Complete system, you're looking at about $800US from Holeshot - provided that you have a B-12 to bolt it to, the time and patience to fab a hanger, jets, etc.
On an additional note, for those of you looking at raising the tail of the Kat, BEWARE of the consequences. With ne-oublie's 1.5" tail-raise dogbones and the slightly-different Ohlins shock, the standover height of the bike has been SIGNIFICANTLY increased - My Kat now has a similar feel to the R6....I'm about 5'11", and am on tip-toe with both feet at a standstill.
Just thought I'd put that out there....
Complete system, you're looking at about $800US from Holeshot - provided that you have a B-12 to bolt it to, the time and patience to fab a hanger, jets, etc.
On an additional note, for those of you looking at raising the tail of the Kat, BEWARE of the consequences. With ne-oublie's 1.5" tail-raise dogbones and the slightly-different Ohlins shock, the standover height of the bike has been SIGNIFICANTLY increased - My Kat now has a similar feel to the R6....I'm about 5'11", and am on tip-toe with both feet at a standstill.
Just thought I'd put that out there....
Comment