Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

1,2,3, sh*t

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1,2,3, sh*t

    so i was taking out the coil wires today to shoot some Pen. oil into the cylinders yesterday 123 came off fine then POP the fourth on seperated from the part that connects to the spark plug, is there a way that i can basically put a bandaid on it or am i **** and have to buy a 100 dollar coil now
    ?

  • #2
    Originally posted by Nickhimself View Post
    so i was taking out the coil wires today to shoot some Pen. oil into the cylinders yesterday 123 came off fine then POP the fourth on seperated from the part that connects to the spark plug, is there a way that i can basically put a bandaid on it or am i **** and have to buy a 100 dollar coil now
    ?

    It screws onto the wire.

    You probably should remove all 4 of them, clip the wires back about 1/2" or so, and screw the boots back on tight to make sure they have a good conection.

    Krey
    93 750 Kat



    Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736

    "I've done this a thousand times before. What could possibly go wron.... Ooops!"

    Comment

    Working...
    X