someone with a pre please help.

[nitros222]

I need someone who has a pre kat 600. To please open your front brake master cylinder with clear brake fluid and take a pic of the inside. I need to see where the small little clip that is in there goes.

I am trying to get mine back together and not sure where it goes

[Jax]

I hope this helps...but if not I'll try to get you a pic...

http://www.bikebandit.com/partsbandit/showschematic~dept_id~1015377.asp

[nitros222]

#7 is the piece but what I dont know is exactly where it goes.

[steves]

Hmm... I don't recall seeing something like that when I flushed the brakes... Does it sit in the bottom of the resoviour?

[nitros222]

Does anyone have a pre with a front master cyclinder. Please I want to put my bike back together. I just need someone to take off the top to there front master cyclinder and tell me where that little metal tab in there goes.

Thank you
Garry

[Special K]

Nitros:

I don't have to do that, I can just tell you! (only seen about 50 or so!!!)

Its the pressure regulator or back flow preventor or somethign like that.........anyway, it goes in the dished-out place in the bottom middle of the reservoir. I almost always face the OPEN END towards the outlet line, (left as you sit on bike).

Be careful - they bend quite easily! 8) Use a pair of forceps or tweezers to replace it in its seat

[nitros222]

awesome,
Thanks Keith

now I can put it back together

[Special K]

........that'll be $1.00...................

[nitros222]

cool I owe you a beer at the gap then